Tag Archives: team

Collaborative Alien Project: Who Are We?

Got my little butt into gear and finally plucked up the courage to ask Grant Herron (a fellow Jewellery student) about possibly collaborating as I heard he was into Film props. He was well up for it surprisingly so we went ahead and got started a couple of weeks later.

We decided to take our own interpretation on a Sci-Fi Film ‘Alien’ by Ridley Scott. Both of us thought we should create some kind of arm piece. Grant, being more experienced in electronics, designed the upper arm which consisted of small LEDs, a small rotating satellite dish and hinged parts. This is what I also wanted to learn from him. For me, well I went all out making a silicone corset forearm piece (as I’d never really played with the material before but was very keen to), a prosthetic glove with ribbed tubes and long hinged creepy fingers, all made from latex of course.

As we were both passionate about film, we discussed perhaps making a short film which would be able to present our piece on the body, moving and electronics in operation. For that we would need a storyboard:

My buddy filling in the storyboard

Here are photos from the making of our pieces:

Grant’s upper arm piece in the making. The circular piece with small tubes protruding from (right of picture) is the joint so I can allow movement like bending my elbow.

 

 

 

The satellite Grant made. Also some LED lights you were able to turn off and on.

This sequence of photographs is me attaching my prosthetic latex glove using Pros Aide glue. You can only really glue prosthetics in stages to make sure you have glued it on properly.

Still loose flapping bits of latex.

After repeatedly applying the glue all the latex should be attached to the skin with no loose parts.

Here is the whole of my lower arm piece put on. The fingers are divided into 3 and there are 2 hinged joints on each finger so they can move. The finger tips are square copper wire soldered together and I have created clear latex windows on each so light can pass through.

Below this you can see tubes extending down from the knuckles which are made from latex and copper wire and lastly the piece on the forearm is made from silicone.

The Silicone Piece

I had to create a mould in plaster to cast the silicone in. It is very weird and squishy to touch which I thought went well with the nature of this project.

The Facial Prosthetics

Just experimenting where it looks best. I thought it would look good to exaggerate the cheekbone.

Samples of prosthetics. They kind of look like slugs to me.

Attached only using the prosthetic glue. You can still see that the edges have not been blended with the skin but that comes next.

The beginning of the blending process… but you can see that later!

Here is me and Grant and a few other helpers on the set just setting and cleaning it up.

Day time

Night time

My 20th time trying to put in contacts

Final Make-up

Midnight on the set. So so cold! Kept my dressing gown on as long as possible!

Just altering a wee bit

Final arm in the dark

Movie making in process

One of the Stop Motion pictures

Final scene

Such a good experience. Think we’ll be collaborating again for our final year as I think it is good practice for the future. You can learn a lot from each other and take things a step further. For me, I want to go into Prosthetics as I see it diminishing due to Computer Aided Graphics (CGI). Yes it can be extremely useful for big things but with it, you lose that sense of actually holding and feeling the object as it is all done on computer. Some makers use it because they are just being lazy and it saves time, but some actually use it for good purpose. For instance, in The Matrix when Neo dodges the bullets, that is a good example of well-used CGI.

Advertisements
Tagged , , , , , , , , , , , , , , , , , , , , , , , , , ,

Critical Making: The Body & Technology Team Project – Week 1

THE BEGINNING

Yes well, this is me finally posting something after many weeks of working on projects. Every Wednesday morning and Thursday we worked on a project called The Body & Technology Project. The project started with a fascinating slide show introduction presented by, the funny, Jason Nelson. The aims of this course is to:

  • help us to develop a cleared understanding of critical thinking and making.
  • develop understanding of materials, fabrication and construction
  • explore historical and contemporary concepts in making.

STAGE 1, WEEK 1

After our introduction we were put into our allocated groups to get to know one another, they were: Rosalind Crawford from Textiles (who I knew from 1st year – she’s brilliant!), Judy Scott from Textiles (lovely lady with a talent for fabrics), Cara from Interior & Environmental Design (or IED), Shona Cairns from IED and, of course, myself from Jewellery & Metal Work.

Each team were given a subject to base their designs on – our subject was HEALTH. Immediately, my team got excited about the project – even when walking from the lecture theatre to our studios we discussed what we could do and make! It became clear that we were a focussed and hard-working group just from judging from that walk.

We visited each of our studios to give one another an idea of what facilities and spaces were on offer, as well as explaining our strengths which could possibly make our group excel more than others.

STAGE 2

After the tours we sat down and began kicking off the project with some brainstorming. This lasted for the whole day! Working together, I felt, was an excellent way to build confidence in your own ideas and to create stronger ideas as others contribute to them. It blended thoughts from different mind-sets (textiles, jewellery and IED) establishing a fantastic method of realising how broad your own discipline can become! Ideas we brainstormed were having the body in balance – to feel relaxed and mentally at ease. This is what we thought could benefit health and THIS is where our team name came about. Balance relates to the astrological sign LIBRA (balancing scales). However we thought if we translated the word into a different language it would sound memorable and more professional, thus, came up with the Swedish term ‘VĂ¥gen‘, meaning scales, however our spelling was VOGEN.

We had a really productive day brainstorming and turning up different solutions to answer our brief – HEALTH. We incorporated smart materials, wearable computers, radio frequencies an 3D printing into some of our ideas. Through this method of group brainstorming it allowed our team VOGEN to really grow, bounce ideas off one another, become motivated and enthusiastic about the project.

Tagged , , , , , ,