Tag Archives: latex

Help Set My Creative Imagination Freeeeee!

205662_264625410334139_315982873_n

Hello there, I’m a young enthusiastic creative prosthetics jewellery designer and maker and am struggling greatly to buy the materials I  require to help me create an amazing Degree Show. So if you like my work, why not help by sponsoring me! I’ve got the skills, I’ve got the passion and the drive to make this happen, if only I had the materials to actually create my show-stoppers. For every pledge you will receive a reward and a huge thank you and all my social networking sites. Please follow the link to pledge: https://sponsorcraft.com/p/zoecreativeprostheticsjewellery/

Thank you! xxxIMG_1718 65110_237236146406399_13443744_n _MG_1674 IMG_5279

Advertisements
Tagged , , , , , , , , , , , , , , , ,

Collaborative Alien Project: Who Are We?

Got my little butt into gear and finally plucked up the courage to ask Grant Herron (a fellow Jewellery student) about possibly collaborating as I heard he was into Film props. He was well up for it surprisingly so we went ahead and got started a couple of weeks later.

We decided to take our own interpretation on a Sci-Fi Film ‘Alien’ by Ridley Scott. Both of us thought we should create some kind of arm piece. Grant, being more experienced in electronics, designed the upper arm which consisted of small LEDs, a small rotating satellite dish and hinged parts. This is what I also wanted to learn from him. For me, well I went all out making a silicone corset forearm piece (as I’d never really played with the material before but was very keen to), a prosthetic glove with ribbed tubes and long hinged creepy fingers, all made from latex of course.

As we were both passionate about film, we discussed perhaps making a short film which would be able to present our piece on the body, moving and electronics in operation. For that we would need a storyboard:

My buddy filling in the storyboard

Here are photos from the making of our pieces:

Grant’s upper arm piece in the making. The circular piece with small tubes protruding from (right of picture) is the joint so I can allow movement like bending my elbow.

 

 

 

The satellite Grant made. Also some LED lights you were able to turn off and on.

This sequence of photographs is me attaching my prosthetic latex glove using Pros Aide glue. You can only really glue prosthetics in stages to make sure you have glued it on properly.

Still loose flapping bits of latex.

After repeatedly applying the glue all the latex should be attached to the skin with no loose parts.

Here is the whole of my lower arm piece put on. The fingers are divided into 3 and there are 2 hinged joints on each finger so they can move. The finger tips are square copper wire soldered together and I have created clear latex windows on each so light can pass through.

Below this you can see tubes extending down from the knuckles which are made from latex and copper wire and lastly the piece on the forearm is made from silicone.

The Silicone Piece

I had to create a mould in plaster to cast the silicone in. It is very weird and squishy to touch which I thought went well with the nature of this project.

The Facial Prosthetics

Just experimenting where it looks best. I thought it would look good to exaggerate the cheekbone.

Samples of prosthetics. They kind of look like slugs to me.

Attached only using the prosthetic glue. You can still see that the edges have not been blended with the skin but that comes next.

The beginning of the blending process… but you can see that later!

Here is me and Grant and a few other helpers on the set just setting and cleaning it up.

Day time

Night time

My 20th time trying to put in contacts

Final Make-up

Midnight on the set. So so cold! Kept my dressing gown on as long as possible!

Just altering a wee bit

Final arm in the dark

Movie making in process

One of the Stop Motion pictures

Final scene

Such a good experience. Think we’ll be collaborating again for our final year as I think it is good practice for the future. You can learn a lot from each other and take things a step further. For me, I want to go into Prosthetics as I see it diminishing due to Computer Aided Graphics (CGI). Yes it can be extremely useful for big things but with it, you lose that sense of actually holding and feeling the object as it is all done on computer. Some makers use it because they are just being lazy and it saves time, but some actually use it for good purpose. For instance, in The Matrix when Neo dodges the bullets, that is a good example of well-used CGI.

Tagged , , , , , , , , , , , , , , , , , , , , , , , , , ,

Luminous Jellyfish

Another very experimental project, following from my Anemone Project, working with fluorescent pigments and ultra-violet light.

Again, my inspiration came from my diving background. In particular, remembering hopping off the boat to go snorkeling and as soon as I got comfortable in the water I saw, what looked like, 8 or so blueish parallel sticks standing vertically underwater. Was very odd. However, as I tried to figure out why they were standing so vertical I noticed there was some kind of clear plastic thing floating above it. I instantly realised that, from the plastic bags’ square shape, it was a Box Jellyfish. Only one of the most poisonous and deadly creatures in the world! As I hurriedly finned to the boat, I shouted “There’s a bloomin’ great big Box Jellyfish in here don’t get in!”

And knowing my dad, he thought it would be good to catch it in our cool box and bring it back to our local Yacht Club to show the kids why stinger/wet suits were so important. My dad actually got stung by one of these bad boys around the ankle.

Anyway, I love seeing how jellyfish move in the water and the different colours they come in. They tend to have luminous tendrils and things that can actually blink to both ward of predators and attract prey. I wanted to investigate ways in which to make colour glow so invested in a UV light bulb which worked wonders! By the way, if you are looking for a UV bulb do NOT get a UV Saving Lamp 75W ES that looks like this:

They might be cheap but they definitely don’t give off UV light just purple light. Just a rip off.

Get one of these Blacklight, ultra violet lamp, low energy BC/B22 Bayonet Fitting High UV light intensity 20W:

These are more expensive, at £9.50 a pop, but are worth the money.

Here are my final pieces. I want to develop this project and make hovering jewellery pieces that look like they are floating with the tide around the body. However, I was really tight with time so made them interior hanging objects.

Tagged , , , , , , , , , , , , , , , ,

Sea Anemone Project

My family are all scuba divers. I love being under the water it’s such a magical place! Feel like a mermaid. It’s brilliant. When I’m under I usually tend to touch things. It’s tempting when there’s colourful little feathery crawlies and wobbly jellies. Once, I got so into it I actually rubbed my face against a sea anemone and it ended up stinging me all over! Ouch. Yes – tip for today: maybe don’t touch things when you haven’t got a clue what it is. Following on from that, I based this project on sea anemones.

They are amazing underwater jellies that possess long wobbly tentacles which wave with the tide. Their colours are vibrant and can usually in groups competing for light just like land plants would do. I really wanted to capture this sense of cluster growth and bright colour, in addition to their strange jelly quality. Here are some of my sketches illustrating their bulbous forms, colour and alien-like features. Be prepared, some of them can be a bit… well, a bit suggestive in shape.

The last picture was my first sample in which I created 3-dimensional crevasses and little hints of colour. I was very pleased with the result as allowed me to think of all kinds of shapes –  the possibilities seemed endless! I even got excited about colour as you will see in my more developed samples below.

Once I got the hang of creating colourful alien-like forms. I tried envisioning pieces on the body. I took inspiration from the designers Lucy Mcrae & Bart Hess and Mi-Mi Moscow. They are both collaborative designers who make creative pieces adorned uniquely on the human form. I like adorning the body in unusual ways because I like morphication and changing the normal shape of the body. Almost like transforming people into underwater creatures themselves. This was my idea.

I wanted to emphasise growth and re-creating the human form. My final outcomes are a mix between final photographs and pieces, aimed to capture unfamiliar shapes and strange alterations to the body.

For my first solution I attached anemone tentacles to the ends of fingers – changing the length and proportion of the fingers to the rest of the body.

Next I created a simple ring with which protrude rather suggestive tentacles. I liked the contrast of the smooth reflective metal to the rubbery matt texture of the latex. The benefits of this ring is you can put on your jacket without worrying about the tentacles breaking off as they are extremely flexible.

Finally I transformed the shape of the back into a kind of extending dorsal fin. Little anemone branches sprout from the surface down the spine as if they were spreading. Long roots stretch across the back to stress this idea of hosting and the ‘taking-over’ of the body.

Next I’ll be looking at making luminescent creatures and incorporating bits of wire to make them look more intricate and delicate. Thanks for checking out some of my work!

http://www.BodyMod.org/flash/mymods.swf

Tagged , , , , , , , , , , , , , , , , , , , , ,

Mary Donald: Latex and Plastics

Mary Donald studied at San Diego State University, where she focussed on Metalsmithing & Jewellery Design. She uses various materials such as wood, rubber, plastics, latex, fibre, metal and unusual found objects to make her unconventional jewellery pieces.

Rubber & Mixed Plastics:

Donald skillfully uses latex and monofilament to create these unique organic pieces.

I love the translucent fleshy colours of these pieces and the alien-like forms – they remind me a little of calamari or embryos. The contrast between the dark singed edges and the pale latex is effective because it makes the pieces stand out more on the wearer.

The piece above is made of mixed plastics, oxidised silver and brass. I particularly like the way Donald has spaced out the shapes to give sense of serenity. A variation of techniques have been used to join the translucent shapes together including drilling, riveting etc.

These two pieces are beautiful and elegant.

Donald has created this piece using orange peel and thread. What makes this piece interesting for me is both the texture and the variation of fold made by the shrivelling peel. The dotty white surface contrasting with the smoother outer orange surface are appealing in creating a highly distinctive and interesting piece.

I am really inspired by Donald’s jewellery because she can somehow unite unusual objects together and make it ‘work’. Her method in disguising the materials and making them look unique and ‘of value’ is what I find truly impressive.

Tagged , , , , , , , ,