Tag Archives: contacts

Collaborative Alien Project: Who Are We?

Got my little butt into gear and finally plucked up the courage to ask Grant Herron (a fellow Jewellery student) about possibly collaborating as I heard he was into Film props. He was well up for it surprisingly so we went ahead and got started a couple of weeks later.

We decided to take our own interpretation on a Sci-Fi Film ‘Alien’ by Ridley Scott. Both of us thought we should create some kind of arm piece. Grant, being more experienced in electronics, designed the upper arm which consisted of small LEDs, a small rotating satellite dish and hinged parts. This is what I also wanted to learn from him. For me, well I went all out making a silicone corset forearm piece (as I’d never really played with the material before but was very keen to), a prosthetic glove with ribbed tubes and long hinged creepy fingers, all made from latex of course.

As we were both passionate about film, we discussed perhaps making a short film which would be able to present our piece on the body, moving and electronics in operation. For that we would need a storyboard:

My buddy filling in the storyboard

Here are photos from the making of our pieces:

Grant’s upper arm piece in the making. The circular piece with small tubes protruding from (right of picture) is the joint so I can allow movement like bending my elbow.

 

 

 

The satellite Grant made. Also some LED lights you were able to turn off and on.

This sequence of photographs is me attaching my prosthetic latex glove using Pros Aide glue. You can only really glue prosthetics in stages to make sure you have glued it on properly.

Still loose flapping bits of latex.

After repeatedly applying the glue all the latex should be attached to the skin with no loose parts.

Here is the whole of my lower arm piece put on. The fingers are divided into 3 and there are 2 hinged joints on each finger so they can move. The finger tips are square copper wire soldered together and I have created clear latex windows on each so light can pass through.

Below this you can see tubes extending down from the knuckles which are made from latex and copper wire and lastly the piece on the forearm is made from silicone.

The Silicone Piece

I had to create a mould in plaster to cast the silicone in. It is very weird and squishy to touch which I thought went well with the nature of this project.

The Facial Prosthetics

Just experimenting where it looks best. I thought it would look good to exaggerate the cheekbone.

Samples of prosthetics. They kind of look like slugs to me.

Attached only using the prosthetic glue. You can still see that the edges have not been blended with the skin but that comes next.

The beginning of the blending process… but you can see that later!

Here is me and Grant and a few other helpers on the set just setting and cleaning it up.

Day time

Night time

My 20th time trying to put in contacts

Final Make-up

Midnight on the set. So so cold! Kept my dressing gown on as long as possible!

Just altering a wee bit

Final arm in the dark

Movie making in process

One of the Stop Motion pictures

Final scene

Such a good experience. Think we’ll be collaborating again for our final year as I think it is good practice for the future. You can learn a lot from each other and take things a step further. For me, I want to go into Prosthetics as I see it diminishing due to Computer Aided Graphics (CGI). Yes it can be extremely useful for big things but with it, you lose that sense of actually holding and feeling the object as it is all done on computer. Some makers use it because they are just being lazy and it saves time, but some actually use it for good purpose. For instance, in The Matrix when Neo dodges the bullets, that is a good example of well-used CGI.

Advertisements
Tagged , , , , , , , , , , , , , , , , , , , , , , , , , ,

Design & The Market: Me Choosing My Path

Oh dear. So yes – putting life in my hands. Today in our Design Market group we looked at choosing the path we would take into achieving our potential business. What you need to think about to make it a sustainable and successful one. Scary stuff.

To begin with, we had a look at our ‘would-be’ customers and wrote down a list of the customer groups they would be. For example: Students; Fashion Runway Buyers; Hospital Buyers; etc. For each one we had to outline what their needs would be, what we would be offering them, how many there are, and so forth. Through this method of analysing our future customers it helps to see if your business has potential and whether it is actually needed. For my business, I found a number of different customer groups which I think is good because it brings range and excitement of varying customers. However, I think I would need a rather large team to back me up on the amount of work I would need to do!

Next, we headed into the Blueprinting Modelling sector. This, I found, was the most difficult. Just couldn’t get my head round where to put things! Blueprinting is a detailed flow diagram of your business’s stages in carrying out, for example, a commission piece. It just shows how your business will function when it’s actually doing business. For me, I looked at where I would go to create contacts then try get some of my work out to the public somehow, find people to work with me and so on. Sounds do-able. This allowed me to view the process of my hopeful business at hand. How it might work. How I can change it tomake it work.

Lastly, we looked at the importance of building relationships in business. Not lovey-dovey ones, professional team-work ones. It is important because it makes all stages in the process work. Imagine doing it all yourself? We focused on the four areas of activity in business. The Generator, the Realiser, the Distributor and the Customer. We had to find people we would need for each of the areas. I placed myself in the Realiser zone, as well as other collaborators, because I feel that is where my strengths lie. However, I would over-see other areas frequently. This exercise allows me to see who I would need to build relationships with and it’s importance. Building relationships improves and makes your business stronger. More sustainable. You just need to make sure there is plenty of trust and that they love the business as much as you do.

These exercises were helpful in outlining how my business would operate, create contacts/clients and who I would need to make it happen. Building relationships crops up again and again. It seems now that who you know can help greatly in business – like the old saying: “It’s not what you know, it’s who you know”.

Tagged , , , , , , , , , , ,