Category Archives: Art

Help Set My Creative Imagination Freeeeee!

205662_264625410334139_315982873_n

Hello there, I’m a young enthusiastic creative prosthetics jewellery designer and maker and am struggling greatly to buy the materials I  require to help me create an amazing Degree Show. So if you like my work, why not help by sponsoring me! I’ve got the skills, I’ve got the passion and the drive to make this happen, if only I had the materials to actually create my show-stoppers. For every pledge you will receive a reward and a huge thank you and all my social networking sites. Please follow the link to pledge: https://sponsorcraft.com/p/zoecreativeprostheticsjewellery/

Thank you! xxxIMG_1718 65110_237236146406399_13443744_n _MG_1674 IMG_5279

Tagged , , , , , , , , , , , , , , , ,

Collaborative Alien Project: Who Are We?

Got my little butt into gear and finally plucked up the courage to ask Grant Herron (a fellow Jewellery student) about possibly collaborating as I heard he was into Film props. He was well up for it surprisingly so we went ahead and got started a couple of weeks later.

We decided to take our own interpretation on a Sci-Fi Film ‘Alien’ by Ridley Scott. Both of us thought we should create some kind of arm piece. Grant, being more experienced in electronics, designed the upper arm which consisted of small LEDs, a small rotating satellite dish and hinged parts. This is what I also wanted to learn from him. For me, well I went all out making a silicone corset forearm piece (as I’d never really played with the material before but was very keen to), a prosthetic glove with ribbed tubes and long hinged creepy fingers, all made from latex of course.

As we were both passionate about film, we discussed perhaps making a short film which would be able to present our piece on the body, moving and electronics in operation. For that we would need a storyboard:

My buddy filling in the storyboard

Here are photos from the making of our pieces:

Grant’s upper arm piece in the making. The circular piece with small tubes protruding from (right of picture) is the joint so I can allow movement like bending my elbow.

 

 

 

The satellite Grant made. Also some LED lights you were able to turn off and on.

This sequence of photographs is me attaching my prosthetic latex glove using Pros Aide glue. You can only really glue prosthetics in stages to make sure you have glued it on properly.

Still loose flapping bits of latex.

After repeatedly applying the glue all the latex should be attached to the skin with no loose parts.

Here is the whole of my lower arm piece put on. The fingers are divided into 3 and there are 2 hinged joints on each finger so they can move. The finger tips are square copper wire soldered together and I have created clear latex windows on each so light can pass through.

Below this you can see tubes extending down from the knuckles which are made from latex and copper wire and lastly the piece on the forearm is made from silicone.

The Silicone Piece

I had to create a mould in plaster to cast the silicone in. It is very weird and squishy to touch which I thought went well with the nature of this project.

The Facial Prosthetics

Just experimenting where it looks best. I thought it would look good to exaggerate the cheekbone.

Samples of prosthetics. They kind of look like slugs to me.

Attached only using the prosthetic glue. You can still see that the edges have not been blended with the skin but that comes next.

The beginning of the blending process… but you can see that later!

Here is me and Grant and a few other helpers on the set just setting and cleaning it up.

Day time

Night time

My 20th time trying to put in contacts

Final Make-up

Midnight on the set. So so cold! Kept my dressing gown on as long as possible!

Just altering a wee bit

Final arm in the dark

Movie making in process

One of the Stop Motion pictures

Final scene

Such a good experience. Think we’ll be collaborating again for our final year as I think it is good practice for the future. You can learn a lot from each other and take things a step further. For me, I want to go into Prosthetics as I see it diminishing due to Computer Aided Graphics (CGI). Yes it can be extremely useful for big things but with it, you lose that sense of actually holding and feeling the object as it is all done on computer. Some makers use it because they are just being lazy and it saves time, but some actually use it for good purpose. For instance, in The Matrix when Neo dodges the bullets, that is a good example of well-used CGI.

Tagged , , , , , , , , , , , , , , , , , , , , , , , , , ,

Luminous Jellyfish

Another very experimental project, following from my Anemone Project, working with fluorescent pigments and ultra-violet light.

Again, my inspiration came from my diving background. In particular, remembering hopping off the boat to go snorkeling and as soon as I got comfortable in the water I saw, what looked like, 8 or so blueish parallel sticks standing vertically underwater. Was very odd. However, as I tried to figure out why they were standing so vertical I noticed there was some kind of clear plastic thing floating above it. I instantly realised that, from the plastic bags’ square shape, it was a Box Jellyfish. Only one of the most poisonous and deadly creatures in the world! As I hurriedly finned to the boat, I shouted “There’s a bloomin’ great big Box Jellyfish in here don’t get in!”

And knowing my dad, he thought it would be good to catch it in our cool box and bring it back to our local Yacht Club to show the kids why stinger/wet suits were so important. My dad actually got stung by one of these bad boys around the ankle.

Anyway, I love seeing how jellyfish move in the water and the different colours they come in. They tend to have luminous tendrils and things that can actually blink to both ward of predators and attract prey. I wanted to investigate ways in which to make colour glow so invested in a UV light bulb which worked wonders! By the way, if you are looking for a UV bulb do NOT get a UV Saving Lamp 75W ES that looks like this:

They might be cheap but they definitely don’t give off UV light just purple light. Just a rip off.

Get one of these Blacklight, ultra violet lamp, low energy BC/B22 Bayonet Fitting High UV light intensity 20W:

These are more expensive, at £9.50 a pop, but are worth the money.

Here are my final pieces. I want to develop this project and make hovering jewellery pieces that look like they are floating with the tide around the body. However, I was really tight with time so made them interior hanging objects.

Tagged , , , , , , , , , , , , , , , ,

Creative Paper: Li-Chu Wu

Li-Chu Wu was born in Taipei, Taiwan. She trained in Jewellery Design at Fu Jen Catholic University and graduated in 2006, followed by completing an MA in Jewellery, Silversmithing and Related Products at Birmingham City University in 2009.

Her sculptural jewellery looks nature inspired portrayed by their bulbous organic shapes. I enjoy looking at the lines made by the multiple layers of coloured paper. Wu’s method of placing bold vibrant colours next to one another is effective in making the pieces striking and particularly attractive in appearance. Their value increases when combining the paper with precious materials such as silver, emphasising that these pieces are truly special.

Wu’s intention is to  convey the values of the materials itself. Some of these pieces are small enough to wear and others possibly intended to be displayed as a unique sculpture because I personally could take time observing these pieces individually. The amount of effort put into making each piece in unmeasurable, Wu must take pleasure in “the making” part of design (the repetitive cutting, placing and gluing) because why else would she use these exact processes in every work. I aspire to this and feel similar in when creating my works, the whole repetitive processes such as weaving, beading, soldering I find is very therapeutic and take great enjoyment in doing it.

Tagged , , , , , , , ,

Wearable Food: Reality and Non-Reality

Sung Yeon Ju was  born in Seoul, Korea 1986 and graduated from Hong IK University in 2010. She has created a beautiful series called ‘Wearable Food’ in which she has produced numerous garments made from food then photographing them.

Starting from top left and along the dress are made of: chives; Lotus root; shrimp; aubergine; red cabbage; leeks; BUBBLEGUM; banana; tomatoes. AMAZING!!!!

In her statement she claims that “Photography has a power to make us believe”, suggesting that a picture, no matter how manipulated it is, we will still think it is real. For example, air-brushed photographs of celebrities make us believe they have no cellulite or wrinkles, however this is never the case. So Yeon Ju’s assertion here is that as time passes – food rots and changes colour and shrivels. But through taking a photograph at the particular moment when the food is fresh, it makes us accept that the dress is unchangeable. But in reality, what really happens? The food on the dress decays therefore does not retain their photographed state – it is not real that food stays fresh forever like in the photo. However, looking at the photograph we feel happiness that this short-lived circumstance could remain.

I love this idea of reality vs non-reality as it makes me think differently of perfect photographs of famous celebs. It cannot be real that you always look perfect. These designs also remind me of Lady Gaga’s meat dress she wore which made you GAG more than craving.

Another artist I would suggest to look at is a guy called Ted Sebarese, he has amazing photography, design and sculpture.

Tagged , , , , , , , ,